If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a fixed shelf at a height of your choosing. The shelf will be 3/4" thick, but the front rail will be 1-3/4" tall (Click to see examples). In the notes field, specify the height of the top of the shelf. The hutch option will automatically come with a fixed shelf without need for this option.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.