If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top); the center divider will not extend below the fixed shelf and there are no adjustable shelves for the space under the fixed shelf. Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a fixed shelf at a height of your choosing. The shelf will be 3/4" thick, but the front rail will be 1-3/4" tall (Click to see examples). In the notes field, specify the height of the top of the shelf. The hutch option will automatically come with a fixed shelf without need for this option.